Ujian Makmal
|
Kami menawarkan lebih daripada 10 tahun pengalaman, menyediakan pelbagai perkhidmatan kepada pelanggan di seluruh dunia.Rangkaian makmal dan kemudahan ujian global kami, dikendalikan oleh kakitangan yang berpengetahuan dan berpengalaman, membantu anda mengurangkan risiko, memendekkan masa ke pasaran dan menunjukkan kualiti dan keselamatan bahan, komponen, atau produk.
Ujian struktur skala penuh adalah forte utama kami. Kita boleh menguji semua jenis struktur seperti dinding, papak, perancah, rasuk, dll. Selain itu, kami menawarkan pelbagai perkhidmatan ujian bahan pembinaan. |
| |
|
|
| |
Antara fasiliti kami:
|
| Reaction floor (15m x 26m) |
|
Reaction wall (6m x 6m) |
|
2000 kN Universal Testing Machine |
|
200 kN Dynamic Testing Machine |
| |
| 300 kN Dynamic Actuator |
|
500 – 2000 kN Static Actuator |
|
Single and Double Portal Frame |
|
|
| |
Jenis-jenis Ujian
|
|
|
|
|
|
 |
|
|
|
- Slump test: BS EN 12350-2-2009
- Compacting factor: BS EN 12350-4-2009
- Cube preparation: BS EN 12390-2-2009
- Cylinder/beam preparation: BS EN 12350-1-2009
|
|
|
|
Scaffolding (A-frame / Modular / Shoring)
|
|
|
|
|
|
- Tensile: MS1462-1, MS1462-2-1, MS 1462-4-1, MS 1462-3-1, MS EN 10210 / MS EN 10219
- Chemical: MS1462-2-1, MS EN 10210 / MS EN 10219
- Flattening: MS1462-2-1
- Dimensioning: MS1462-2-1, MS 1462-4-1, MS 1462-3-1
- Zinc coating thickness:
- ISO 2178/ISO 1461, BS EN ISO 9227, EN 10240 / EN 1461, EN ISO 2409 / ISO 253, MS 1462-4-2
- Coating adhesion: ISO 2409
- Coating mass (min. 2 samples): MS 2384, MS 2385, AS 1397
- Stairway (cyclic load): MS 1462-3-2, MS 1462-4-1
- Test for Corrosion Resistance (Salt Spray): MS ISO 9227
- Compressive Strength of Vertical / Horizontal Tube: MS1462-1
- Load Test on Scaffolding Component (Steel Prop,Bracket, Arms Lock, Wall Tie, Brace Pins):
- MS1462-1, MS 1462-4-1
- Structure Test - Load Test (3 bay x 3 lift and 1 bay x 3 lift): MS1462-1, MS 1462-3-2
- Coupler test - Force (slipping/failure/pull apart), indentation, bending & rotational moment: MS1462-2-3
- Drop Test (Shear & Moment): MS 1462-3-2
|
|
|
|
|
|
|
|
|
|
- Concrete coring through reinforced concrete: BS EN 12504-1
- Core specimen density: BS EN 12390-3:2009
- Compressive strength of core sample (trimmed & capped): BS EN 12504-1
- Compressive strength of core sample (without trimmed & capped): BS EN 12504-1
|
|
|
|
Hardened Concrete / Brick /Block
|
|
|
|
|
|
- Cube compression test: BS EN 12390-3-2009
- Cylinder compression test: BS EN 12390-3-2009
- Beam flexural test: BS EN 12390-5
- Cylinder tensile splitting test: BS EN 12390-6
|
|
|
|
|
|
|
|
|
|
- Surface hardness (12 reading per set): BS 1881 - 202: 1986/BS EN 12504-2:2012
- Rebound hammer: Analog / digital: BS 1881 - 202: 1986/BS EN 12504-2:2012
|
|
|
|
|
|
|
|
|
|
- Compressive strength of cement mortar cube: BS EN 196-1:2016
- Chemical composition (XRF Method): BS EN 196-1:2016
|
|
|
Full Scale Structure Test
|
|
|
|
|
|
- Flexural test on beam / pile / wall / hollow core / slab
- Compression test on wall panel l
- Shear test on beam / hollow core / slab
- Other IBS / Structural component test
|
|
|
|
|
|
FAQ
|
|
|
| |
| Untuk sebarang pertanyaan, sila hubungi: |
Makmal Kerja Raya Malaysia (MKRM)
Tel : +603 9212 0165 Ext 301 (MKRM KL)
+603 9212 9658 Ext 701 (MKRM Sarawak)
+603 9212 9653 (MKRM Sabah)
Email: [email protected] / [email protected] |
|
|