Product Certification

 Home / Product Certification

Product Certification Scheme

NO. TYPE OF CONSTRUCTION MATERIAL PRODUCT REQUIREMENT
1. CEMENT
1.1 Portland cement
a. White portland cements of all kinds MS 888
b. Others portland cement of all kinds MS EN 197 : Part 1 & 2
1.2 Aluminous cement BS 915, BS EN 14647
1.3 Other hydraulic cement MS EN 197 : Part 1 & 2
1.4 Masonry Cement MS EN 413 : Part 1 & 2
2. PREFABRICATED TIMBER ROOF TRUSS SYSTEM CIS 5
3. PRECAST CONCRETE PILES FOR FOUNDATION MS 1314: Part 1 to Part 7
4. IRON AND STEEL PRODUCTS
4.1 Hot-rolled carbon steel sheets / plates
a. Hot Rolled Steel Coil / Sheets / Plates MS EN 10025 : Part 2
MS 1705
MS 1768
b. Hot Rolled Chequered coils / Sheets / plates ASTM A786
MS EN 10025 : Part 2
4.2 COATED STEEL – COILS / SHEETS
a. Electrolytically plated or coated with zinc (Coils/sheets) MS 2543
b. Hot-dip Zinc-Coated carbon steel coil/sheet. Otherwise plated or coated with zinc.
* Only in sheets
*MS 2500 (Profile)
MS 2384
MS 2385
c. Continuous hot-dip
Aluminium- Zinc alloy- coated coil/sheet.
Plated or coated with Aluminium-Zinc alloys.
* Only in sheets
*MS 2500 (Profile)
JIS G 3317
JIS G 3323
MS 1196
AS 1397
d. Painted, varnished or coated with plastics MS 2383
JIS G 3318
4.3 STRUCTURAL AND OTHER CAST IRON AND ARTICLES
i. Bridges and bridge sections
ii. Towers and lattice masts

iii. Scaffolding

iv. Corrugated sheet pile Cold form
v. Bearing piles –angle shape and section

vi. Guardrails

vii. Fabricated structure
MS EN 10025 : Part 2
MS EN 10025 : Part 2

MS 1462

MS 2025- 1
MS 2025-2

MS EN 10025 : Part 2

AASHTO M-180
BS EN ISO- 1461

MS EN 10025 : Part 2
viii. Railway track JIS E 1101
DIN 536
BS EN 13674-1
x.Light gauge steel section


xi. Equal Angles, shape and section U,I, L,T or H sections
MS EN 10025 : Part 2
JIS G 3350

MS EN 10025 : Part 2
4.4 WIRE ROD ,BARS AND WIRES
a. Coil Form
i.Hot rolled steel reinforcement bar JMS 146
ii.Steel Wire Rod MS ISO 16120-1
MS ISO 16120-2
MS ISO 16120-3
MS ISO 16120-4
iii.Round bar in coil MS 144
iv.Wire, Strands and Ropes MS 1138-2
MS 1138-3
MS 1138-4
MS ISO 4344
MS ISO 2408
b. Wire mesh for Construction MS 145
c. Straight Form
i. Carbon Steel for Structural Use
ii. Carbon steel for structural machine use (Flat bar)
iii. Hot rolled steel reinforcement bar
MS 144
MS EN 10025 : Part 2
MS 146
iv.Round bar MS 144
5. READY MIX CONCRETE MS 523 : Part 1 to 3, CIS 21



General Certification Process

application2



Certification Charges

For further enquiries regarding the certification charges, please contact :

CREAM Certification Services team at hotline +60(03)-9281 0800 or drop your email to ccs@cidb.gov.my.



  • CREAM CCS
  •   Construction Research Institute of Malaysia (CREAM)
    Makmal Kerja Raya Malaysia,
    CIDB Wilayah Persekutuan,
    1st Floor, Block E, Lot 8, Jln Chan Sow Lin,
    55200 Kuala Lumpur, MALAYSIA
  •   +60(03) 9281 0800
  •   +60(03) 9282 4800
  • ccs@cidb.gov.my

About CCS

 CREAM is acronym for Construction Research Institute of Malaysia. It was incorporated on the 26th March 2004 as a company limited by guarantee without a share capital under the companies Act 1965 on the initiative of the Construction Industries Development Board of Malaysia (CIDB)..


Read more

CCS @ Facebook